Pimp Yo' Phone

I don't have a fancy iPhone, and while that sucks, I decided to make my phone cool too. So here is what I did with my Samsung Intensity II.

1.) Take the back off your phone. Make sure you have
enough fabric to go over the back snugly. 

2.) Trace the back on a piece of news paper.
Go around the edges of the back loosely.
The curve should peel up, just keep your pencil
straight up and down and you will be fine. 

3.) Cut out the pattern you just drew.
Make sure you cut out the holes for the camera and
microphone in the paper. An exacto knife is very useful
here. Trace it onto the fabric and cut it out. 

4.) Put it on the back right side up. Make sure
it fit correctly. Using lots of tape, go over the
entire back, holes included. The two microphone
holes were too small, so I combined them into one
long hole. 

5.) Flip it over and make sure any pieces that stick
out from the sleep shape do not have tape over
them or you will have a tough time putting the
back on. Use an exacto knife to cut the excess tape
off. Also, cut out the holes for the camera and
microphone.